Datasheet

© 2009 Microchip Technology Inc. Preliminary DS39937B-page 189
PIC24F04KA201 FAMILY
DC31
8
28
μA
-40°C
1.8V
LPRC (31 kHz)
DC31a 28 +25°C
DC31b 28 +60°C
DC31c 28 +85°C
DC31d
15
55
μA
-40°C 3.3V
DC31e 55 +25°C
DC31f 55 +60°C
DC31g 55 +85°C
TABLE 26-7: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
Param No. Typical
(1)
Max Units Conditions
Idle Current (I
IDLE): Core Off, Clock on Base Current, PMD Bits are Set
(2)
DC40
48
100
μA
-40°C
1.8V
0.5 MIPS,
F
OSC = 1 MHz
DC40a 100 +25°C
DC40b 100 +60°C
DC40c 100 +85°C
DC40d
106
215
μA
-40°C
3.3V
DC40e 215 +25°C
DC40f 215 +60°C
DC40g 215 +85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Operating Parameters:
• Core off
• EC mode with clock input driven with a square wave rail-to-rail
• I/O configured as outputs driven low
• MCLR – VDD
• WDT FSCM disabled
• SRAM, program and data memory active
• All PMD bits set except for modules being measured
TABLE 26-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
Parameter No. Typical
(1)
Max Units Conditions
I
DD Current
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: Operating Parameters:
• EC mode with clock input driven with a square wave rail-to-rail
• I/O configured as outputs driven low
• MCLR
– VDD
• WDT FSCM disabled
• SRAM, program and data memory active
• All PMD bits set except for modules being measured