Datasheet
dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
DS70616G-page 508  2009-2012 Microchip Technology Inc.
IICL Input Low Injection Current
DI60a
0—-5
(5,8)
mA
All pins except VDD, 
VSS, AVDD, AVSS, 
MCLR, VCAP, RB11, 
SOSCI, SOSCO, D+, 
D-, V
USB3V3 and VBUS
IICH Input High Injection Current
DI60b
0—+5
(6,7,4)
mA
All pins except V
DD, 
VSS, AVDD, AVSS, 
MCLR, VCAP, RB11, 
SOSCI, SOSCO, D+, 
D-, V
USB3V3 and VBUS, 
and all 5V tolerant 
pins
(7)
IICT Total Input Injection Current
(sum of all I/O and control 
pins)
DI60c -20
(9)
—+20
(9)
mA Absolute instantaneous 
sum of all ± input 
injection currents from 
all I/O pins
(| I
ICL + | IICH |)  IICT
TABLE 32-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C   T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Symbol Characteristic Min. Typ
(1)
Max. Units Conditions
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: The leakage current on the MCLR
 pin is strongly dependent on the applied voltage level. The specified 
levels represent normal operating conditions. Higher leakage current can be measured at different input 
voltages.
3: Negative current is defined as current sourced by the pin.
4: See “Pin Diagrams” for the 5V tolerant I/O pins.
5: V
IL source < (VSS – 0.3). Characterized but not tested.
6: Non-5V tolerant pins V
IH source > (VDD + 0.3), 5V tolerant pins VIH source > 5.5V. Characterized but not 
tested.
7: Digital 5V tolerant pins cannot tolerate any “positive” input injection current from input sources > 5.5V.
8: Injection currents > | 0 | can affect the ADC results by approximately 4-6 counts. 
9: Any number and/or combination of I/O pins not excluded under I
ICL or IICH conditions are permitted, pro-
vided the mathematical “absolute instantaneous” sum of the input injection currents from all pins do not 
exceed the specified limit. Characterized but not tested.
10: These parameters are characterized, but not tested.










