Datasheet

 2007-2012 Microchip Technology Inc. DS39778E-page 61
PIC18F87J11 FAMILY
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS
(4)
Register Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR
Resets,
WDT Reset,
RESET Instruction,
Stack Resets,
CM Resets
Wake-up via WDT
or Interrupt
TOSU PIC18F6XJ1X PIC18F8XJ1X ---0 0000 ---0 0000 ---0 uuuu
(1)
TOSH PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
(1)
TOSL PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
(1)
STKPTR PIC18F6XJ1X PIC18F8XJ1X 00-0 0000 uu-0 0000 uu-u uuuu
(1)
PCLATU PIC18F6XJ1X PIC18F8XJ1X ---0 0000 ---0 0000 ---u uuuu
PCLATH PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
PCL PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 PC + 2
(2)
TBLPTRU PIC18F6XJ1X PIC18F8XJ1X --00 0000 --00 0000 --uu uuuu
TBLPTRH PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
TBLPTRL PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
TABLAT PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
PRODH PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
PRODL PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
INTCON PIC18F6XJ1X PIC18F8XJ1X 0000 000x 0000 000u uuuu uuuu
(3)
INTCON2 PIC18F6XJ1X PIC18F8XJ1X 1111 1111 1111 1111 uuuu uuuu
(3)
INTCON3 PIC18F6XJ1X PIC18F8XJ1X 1100 0000 1100 0000 uuuu uuuu
(3)
INDF0 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
POSTINC0 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
POSTDEC0 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
PREINC0 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
PLUSW0 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
FSR0H PIC18F6XJ1X PIC18F8XJ1X ---- xxxx ---- 0000 ---- uuuu
FSR0L PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
WREG PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
INDF1 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
POSTINC1 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
POSTDEC1 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
PREINC1 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
PLUSW1 PIC18F6XJ1X PIC18F8XJ1X N/A N/A N/A
FSR1H PIC18F6XJ1X PIC18F8XJ1X ---- xxxx ---- 0000 ---- uuuu
FSR1L PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
BSR PIC18F6XJ1X PIC18F8XJ1X ---- 0000 ---- 0000 ---- uuuu
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be effected (to cause wake-up).
4: See Table 5 -2 for Reset value for specific conditions.