Datasheet

© 2009 Microchip Technology Inc. DS39663F-page 139
PIC18F87J10 FAMILY
TABLE 11-12: SUMMARY OF REGISTERS ASSOCIATED WITH PORTE
RE6/AD14/
P1B
RE6 0 O DIG LATE<6> data output.
1 I ST PORTE<6> data input.
AD14
(3)
x O DIG External memory interface, address/data bit 14 output.
(2)
x I TTL External memory interface, data bit 14 input.
(2)
P1B
(1)
0 O DIG ECCP1 Enhanced PWM output, Channel B; takes priority over port
and PSP data. May be configured for tri-state during Enhanced PWM
shutdown events.
RE7/AD15/
ECCP2/P2A
RE7 0 O DIG LATE<7> data output.
1 I ST PORTE<7> data input.
AD15
(3)
x O DIG External memory interface, address/data bit 15 output.
(2)
x I TTL External memory interface, data bit 15 input.
(2)
ECCP2
(4)
0 O DIG CCP2 compare output and CCP2 PWM output; takes priority over
port data.
1 I ST CCP2 capture input.
P2A
(4)
0 O DIG ECCP2 Enhanced PWM output, Channel A; takes priority over port
and PSP data. May be configured for tri-state during Enhanced PWM
shutdown events.
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reset
Values
on page
PORTE RE7 RE6 RE5 RE4 RE3 RE2 RE1 RE0 56
LATE LATE7 LATE6 LATE5 LATE4 LATE3 LATE2 LATE1 LATE0 56
TRISE TRISE7 TRISE6 TRISE5 TRISE4 TRISE3 TRISE2 TRISE1 TRISE0 56
PORTG
RDPU REPU RJPU
(1)
RG4 RG3 RG2 RG1 RG0 56
Legend: Shaded cells are not used by PORTE.
Note 1: Unimplemented on 64-pin devices, read as ‘0’.
TABLE 11-11: PORTE FUNCTIONS (CONTINUED)
Pin Name Function
TRIS
Setting
I/O
I/O
Type
Description
Legend: PWR = Power Supply, O = Output, I = Input, ANA = Analog Signal, DIG = Digital Output, ST = Schmitt Buffer Input,
TTL = TTL Buffer Input, x = Don’t care (TRIS bit does not affect port direction or is overridden for this option).
Note 1: Default assignments for P1B/P1C and P3B/P3C when ECCPMX Configuration bit is set (80-pin devices only).
2: External memory interface I/O takes priority over all other digital and PSP I/O.
3: Available on 80-pin devices only.
4: Alternate assignment for ECCP2/P2A when the CCP2MX Configuration bit is cleared (all devices in Microcontroller mode).