Datasheet

PIC18F87K22 FAMILY
DS39960D-page 86  2009-2011 Microchip Technology Inc.
ODCON2
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0000 uuuu uuuu uuuu uuuu
ODCON2 PIC18F65K22 PIC18F85K22 --00 0000 --uu uuuu --uu uuuu
ODCON3 PIC18F6XK22 PIC18F8XK22 00-- ---0 uu-- ---u uu-- ---u
MEMCON
PIC18F6XK22 PIC18F8XK22 0-00 --00 0-00 --00 u-uu --uu
ANCON0 PIC18F6XK22 PIC18F8XK22 1111 1111 uuuu uuuu uuuu uuuu
ANCON1 PIC18F6XK22 PIC18F8XK22 1111 1111 uuuu uuuu uuuu uuuu
ANCON2 PIC18F6XK22 PIC18F8XK22 1111 1111 uuuu uuuu uuuu uuuu
RCSTA2 PIC18F6XK22 PIC18F8XK22 0000 000x 0000 000x uuuu uuuu
TXSTA2 PIC18F6XK22 PIC18F8XK22 0000 0010 0000 0010 uuuu uuuu
BAUDCON2 PIC18F6XK22 PIC18F8XK22 0100 0-00 0100 0-00 uuuu u-uu
SPBRGH2 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
SPBRG2 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
RCREG2 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
TXREG2
PIC18F6XK22 PIC18F8XK22 xxxx xxxx xxxx xxxx
uuuu uuuu
PSTR2CON PIC18F6XK22 PIC18F8XK22 00-0 0001 00-0 0001 uu-u uuuu
PSTR3CON PIC18F6XK22 PIC18F8XK22 00-0 0001 00-0 0001 uu-u uuuu
PMD0 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
PMD1 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
PMD2
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0000 0000 0000 uuuu uuuu
PMD2 PIC18F65K22 PIC18F85K22 -0-0 0000 -0-0 0000 -u-u uuuu
PMD3
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0000 0000 0000 uuuu uuuu
PMD3 PIC18F65K22 PIC18F85K22 --00 000- --00 000- --uu uuu-
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets,
WDT Reset,
RESET Instruction,
Stack Resets,
CM Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt, and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the hardware
stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt vector
(0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.