Datasheet

 2009-2011 Microchip Technology Inc. DS39960D-page 85
PIC18F87K22 FAMILY
CCP10CON
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
--00 0000 --00 0000 --uu uuuu
TMR7H
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
xxxx xxxx uuuu uuuu uuuu uuuu
TMR7L
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
xxxx xxxx uuuu uuuu uuuu uuuu
T7CON
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0000 uuuu uuuu uuuu uuuu
T7GCON
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0x00 0000 0x00 uuuu uuuu
TMR6 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
PR6 PIC18F6XK22 PIC18F8XK22 1111 1111 1111 1111 uuuu uuuu
T6CON PIC18F6XK22 PIC18F8XK22 -000 0000 -000 0000 -uuu uuuu
TMR8 PIC18F6XK22 PIC18F8XK22 0000 0000 0000 0000 uuuu uuuu
PR8 PIC18F6XK22 PIC18F8XK22 1111 1111 1111 1111 uuuu uuuu
T8CON PIC18F6XK22 PIC18F8XK22 -000 0000 -000 0000 -uuu uuuu
TMR10
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0000 0000 0000 uuuu uuuu
PR10
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
1111 1111 1111 1111 uuuu uuuu
T10CON
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
-000 0000 -000 0000 -uuu uuuu
TMR12
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
0000 0000 0000 0000 uuuu uuuu
PR12
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
1111 1111 1111 1111 uuuu uuuu
T12CON
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
-000 0000 -000 0000 -uuu uuuu
CM2CON PIC18F6XK22 PIC18F8XK22 0001 1111 0001 1111 uuuu uuuu
CM3CON PIC18F6XK22 PIC18F8XK22 0001 1111 0001 1111 uuuu uuuu
CCPTMRS0 PIC18F6XK22 PIC18F8XK22 0000 0000 uuuu uuuu uuuu uuuu
CCPTMRS1 PIC18F6XK22 PIC18F8XK22 00-0 -000 uu-u -uuu uu-u -uuu
CCPTMRS2
PIC18F66K22
PIC18F67K22
PIC18F86K22
PIC18F87K22
---0 -000 ---u -uuu ---u -uuu
CCPTMRS2 PIC18F65K22 PIC18F85K22 ---- --00 ---- --uu ---- --uu
REFOCON PIC18F6XK22 PIC18F8XK22 0-00 0000 u-uu uuuu u-uu uuuu
ODCON1 PIC18F6XK22 PIC18F8XK22 000- ---0 uuu- ---u uuu- ---u
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets,
WDT Reset,
RESET Instruction,
Stack Resets,
CM Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt, and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the hardware
stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt vector
(0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.