Datasheet

 2007-2012 Microchip Technology Inc. DS39778E-page 401
PIC18F87J11 FAMILY
28.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias.............................................................................................................-40°C to +100°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on any digital only input pin or MCLR
with respect to VSS (except VDD) ........................................ -0.3V to 6.0V
Voltage on any combined digital and analog pin with respect to V
SS ............................................. -0.3V to (VDD + 0.3V)
Voltage on V
DDCORE with respect to VSS................................................................................................... -0.3V to 2.75V
Voltage on V
DD with respect to VSS ........................................................................................................... -0.3V to 4.0V
Total power dissipation (Note 1) ...............................................................................................................................1.0W
Maximum current out of V
SS pin ...........................................................................................................................300 mA
Maximum current into V
DD pin ..............................................................................................................................250 mA
Input clamp current, I
IK (VI < 0 or VI > VDD) (Note 2) 0mA
Output clamp current, I
OK (VO < 0 or VO > VDD) (Note 2) 0mA
Maximum output current sunk by any PORTB and PORTC I/O pins......................................................................25 mA
Maximum output current sunk by any PORTD, PORTE and PORTJ I/O pins ..........................................................8 mA
Maximum output current sunk by any PORTA, PORTF, PORTG and PORTH I/O pins............................................2 mA
Maximum output current sourced by any PORTB and PORTC I/O pins.................................................................25 mA
Maximum output current sourced by any PORTD, PORTE and PORTJ I/O pins.....................................................8 mA
Maximum output current sourced by any PORTA, PORTF, PORTG and PORTH I/O pins ......................................2 mA
Maximum current sunk byall ports combined.......................................................................................................200 mA
Maximum current sourced by all ports combined..................................................................................................200 mA
Note 1: Power dissipation is calculated as follows:
Pdis = V
DD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOL x IOL) + (VTPOUT x ITPOUT)
2: No clamping diodes are present.
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above
those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions
for extended periods may affect device reliability.