Datasheet

PIC18F6585/8585/6680/8680
DS30491D-page 132  2003-2013 Microchip Technology Inc.
TABLE 10-5: PORTC FUNCTIONS
TABLE 10-6: SUMMARY OF REGISTERS ASSOCIATED WITH PORTC
Name Bit# Buffer Type Function
RC0/T1OSO/T13CKI bit 0 ST Input/output port pin, Timer1 oscillator output or Timer1/Timer3
clock input.
RC1/T1OSI/CCP2
(1)
bit 1 ST Input/output port pin, Timer1 oscillator input or Capture 2 input/
Compare 2 output/PWM output (when CCP2MX configuration bit is
disabled).
RC2/CCP1/P1A bit 2 ST Input/output port pin or Capture 1 input/Compare 1 output/
PWM1 output.
RC3/SCK/SCL bit 3 ST RC3 can also be the synchronous serial clock for both SPI and I
2
C
modes.
RC4/SDI/SDA bit 4 ST RC4 can also be the SPI data in (SPI mode) or data I/O (I
2
C mode).
RC5/SDO bit 5 ST Input/output port pin or synchronous serial port data output.
RC6/TX/CK bit 6 ST Input/output port pin, addressable USART asynchronous transmit or
addressable USART synchronous clock.
RC7/RX/DT bit 7 ST Input/output port pin, addressable USART asynchronous receive or
addressable USART synchronous data.
Legend: ST = Schmitt Trigger input
Note 1: RB3 is the alternate assignment for CCP2 when CCP2MX is set.
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Value on
POR, BOR
Value on
all other
Resets
PORTC RC7 RC6 RC5 RC4 RC3 RC2 RC1 RC0 xxxx xxxx uuuu uuuu
LATC LATC Data Output Register xxxx xxxx uuuu uuuu
TRISC PORTC Data Direction Register 1111 1111 1111 1111
Legend: x = unknown, u = unchanged
18F8680.book Page 132 Tuesday, January 29, 2013 1:32 PM