Datasheet
2003-2013 Microchip Technology Inc. DS30491D-page 41
PIC18F6585/8585/6680/8680
RXB0EIDL PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB0EIDH PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB0SIDL PIC18F6X8X PIC18F8X8X xxxx x-xx uuuu u-uu uuuu u-uu
RXB0SIDH PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB0CON PIC18F6X8X PIC18F8X8X 000- 0000 000- 0000 uuu- uuuu
RXB1D7 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D6 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D5 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D4 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D3 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D2 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D1 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1D0 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1DLC PIC18F6X8X PIC18F8X8X -xxx xxxx -uuu uuuu -uuu uuuu
RXB1EIDL PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1EIDH PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1SIDL PIC18F6X8X PIC18F8X8X xxxx x-xx uuuu u-uu uuuu u-uu
RXB1SIDH PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
RXB1CON PIC18F6X8X PIC18F8X8X 000- 0000 000- 0000 uuu- uuuu
TXB0D7 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D6 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D5 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D4 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D3 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D2 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D1 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0D0 PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0DLC PIC18F6X8X PIC18F8X8X -x-- xxxx -u-- uuuu -u-- uuuu
TXB0EIDL PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu uuuu uuuu
TXB0EIDH PIC18F6X8X PIC18F8X8X xxxx xxxx uuuu uuuu -uuu uuuu
TXB0SIDL PIC18F6X8X PIC18F8X8X xxx- x-xx uuu- u-uu uuu- u-uu
TABLE 3-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR
Resets
WDT Reset
RESET Instruction
Stack Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the
interrupt vector (0008h or 0018h).
3: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
4: See Table 3-2 for Reset value for specific condition.
5: Bit 6 of PORTA, LATA, and TRISA are enabled in ECIO and RCIO Oscillator modes only. In all other
oscillator modes, they are disabled and read ‘0’.
6: Bit 6 of PORTA, LATA and TRISA are not available on all devices. When unimplemented, they read ‘0’.
7: This register reads all ‘0’s until ECAN is set up in Mode 1 or Mode 2.
18F8680.book Page 41 Tuesday, January 29, 2013 1:32 PM