Datasheet

PIC18F6390/6490/8390/8490
DS39629C-page 362 © 2007 Microchip Technology Inc.
26.3 DC Characteristics: PIC18F6390/6490/8390/8490 (Industrial)
PIC18LF6390/6490/8390/8490 (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial
Param
No.
Symbol Characteristic Min Max Units Conditions
V
IL Input Low Voltage
I/O Ports:
D030 with TTL Buffer V
SS 0.15 VDD VVDD < 4.5V
D030A — 0.8 V 4.5V ≤ VDD ≤ 5.5V
D031 with Schmitt Trigger Buffer
RC3 and RC4
VSS
VSS
0.2 VDD
0.3 VDD
V
V
D032 MCLR
VSS 0.2 VDD V
D032A OSC1 and T1OSI VSS 0.3 VDD V LP, XT, HS, HSPLL
modes
(1)
D033 OSC1 VSS 0.2 VDD VEC mode
(1)
VIH Input High Voltage
I/O Ports:
D040 with TTL Buffer 0.25 V
DD + 0.8V VDD VVDD < 4.5V
D040A 2.0 VDD V4.5V ≤ VDD ≤ 5.5V
D041 with Schmitt Trigger Buffer
RC3 and RC4
0.8 V
DD
0.7 VDD
VDD
VDD
V
V
D042 MCLR
0.8 VDD VDD V
D042A OSC1 and T1OSI 0.7 V
DD VDD V LP, XT, HS, HSPLL
modes
(1)
D043 OSC1 0.8 VDD VDD VEC mode
(1)
IIL Input Leakage Current
(2,3)
D060 I/O Ports — ±1 μAV
SS ≤ VPIN ≤ VDD,
Pin at hi-impedance
D061 MCLR
— ±5 μAVSS ≤ VPIN ≤ VDD
D063 OSC1 — ±5 μAVSS ≤ VPIN ≤ VDD
I
PU Weak Pull-up Current
D070 I
PURB PORTB Weak Pull-up Current 50 400 μAVDD = 5V, VPIN = VSS
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC
®
device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.