Information
Table Of Contents
- TABLE 1: Silicon DEVREV Values
- TABLE 2: Silicon Issue Summary
- Silicon Errata Issues
- 1. Module: Analog-to-Digital Converter (A/D)
- 2. Module: Ports
- 3. Module: High/Low Voltage Detect (HLVD)
- 4. Module: ECCP
- 5. Module: EUSART
- 6. Module: Ipd and Idd
- 7. Module: Ultra Low-Power Sleep
- 8. Module: Resets (BOR)
- 9. Module: RG5 Pin
- 10. Module: Primary Oscillator (XT Mode)
- Data Sheet Clarifications
- 1. Module: Electrical Characteristics
- 2. Module: Voltage Regulator Pins (ENVREG and Vcap/Vddcore)
- 3. Module: DC Characteristics (Injection Current)
- 4. Module: DC Characteristics (Input Low Voltage and Input High Voltage)
- Appendix A: Document Revision History
- Trademarks
- Worldwide Sales
PIC18F87K90 FAMILY
DS80000500F-page 10 2010-2013 Microchip Technology Inc.
3. Module: DC Characteristics
(Injection Current)
The following table of specifications for current
injected into the microcontroller will be added to
Section 31.0 “Electrical Characteristics”.
31.4 DC Characteristics: PIC18F87K90 Family (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 5.5V
Operating temperature -40°C TA +85°C for Industrial
-40°C T
A +125°C for Extended
Param.
No.
Symbol Characteristic Min. Typ. Max. Units Conditions
D160a I
ICL Input Low Injection Current 0 — -5
(1)
mA All pins except VDD, VSS,
AV
DD, AVSS, MCLR, VCAP,
SOSCI, SOSCO
D160b I
ICH Input High Injection Current 0 — +5
(1)
mA All pins except VDD, VSS,
AV
DD, AVSS, MCLR, VCAP,
SOSCI, SOSCO
D160c I
ICT Total Input Injection Current
(sum of all I/O and control
pins)
-20
(1,2)
—+20
(1,2)
mA Absolute instantaneous
sum of all input injection
currents from all I/O pins
( I
ICL + IICH) IICT
Note 1: Injection currents > 0 can affect the A/D results.
2: Any number and/or combination of I/O pins not excluded under IICL or IICH conditions are permitted.