Datasheet

 2003-2013 Microchip Technology Inc. DS39612C-page 331
PIC18F6525/6621/8525/8621
27.3 DC Characteristics: PIC18F6525/6621/8525/8621 (Industrial, Extended)
PIC18LF6X2X/8X2X (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +85°C for industrial
-40°C T
A  +125°C for extended
Param
No.
Symbol Characteristic Min Max Units Conditions
V
IL Input Low Voltage
I/O ports:
D030 with TTL buffer V
SS 0.15 VDD VVDD < 4.5V
D030A — 0.8 V 4.5V  VDD 5.5V
D031 with Schmitt Trigger buffer
RC3 and RC4
V
SS
VSS
0.2 VDD
0.3 VDD
V
V
D032 MCLR
VSS 0.2 VDD V
D033 OSC1 V
SS 0.3 VDD V HS, HS+PLL modes
D033A OSC1 V
SS 0.2 VDD V RC, EC modes
D033B OSC1 VSS 0.3 V XT, LP modes
D034 T1OSI V
SS 0.3 V
VIH Input High Voltage
I/O ports:
D040 with TTL buffer 0.25 V
DD + 0.8V VDD VVDD < 4.5V
D040A 2.0 VDD V4.5V  VDD 5.5V
D041 with Schmitt Trigger buffer
RC3 and RC4
0.8 VDD
0.7 VDD
VDD
VDD
V
V
D042 MCLR
, OSC1 (EC mode) 0.8 VDD VDD V
D043 OSC1 0.7 VDD VDD V HS, HS+PLL modes
D043A OSC1 0.8 V
DD VDD VEC mode
D043B OSC1 0.9 VDD VDD V RC mode
(1)
D043C OSC1 1.6 VDD VXT, LP modes
D044 T13CKI 1.6 V
DD V
IIL Input Leakage Current
(2,3)
D060 I/O ports — 1 AVSS VPIN VDD,
Pin at high-impedance
D061 MCLR
— 5 AVSS VPIN VDD
D063 OSC1 — 5 AVSS VPIN VDD
I
PU Weak Pull-up Current
D070 IPURB PORTB weak pull-up current 50 400 AVDD = 5V, VPIN = VSS
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC
®
device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR
pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.