Datasheet

© 2009 Microchip Technology Inc. DS39663F-page 57
PIC18F87J10 FAMILY
ECCP1DEL PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
TMR4 PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
PR4 PIC18F6XJ1X PIC18F8XJ1X 1111 1111 1111 1111 1111 1111
T4CON PIC18F6XJ1X PIC18F8XJ1X -000 0000 -000 0000 -uuu uuuu
CCPR4H PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
CCPR4L PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
CCP4CON PIC18F6XJ1X PIC18F8XJ1X --00 0000 --00 0000 --uu uuuu
CCPR5H PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
CCPR5L PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
CCP5CON PIC18F6XJ1X PIC18F8XJ1X --00 0000 --00 0000 --uu uuuu
SPBRG2 PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
RCREG2 PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
TXREG2 PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
TXSTA2 PIC18F6XJ1X PIC18F8XJ1X 0000 0010 0000 0010 uuuu uuuu
RCSTA2 PIC18F6XJ1X PIC18F8XJ1X 0000 000x 0000 000x uuuu uuuu
ECCP3AS PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
ECCP3DEL PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
ECCP2AS PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
ECCP2DEL PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
SSP2BUF PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx uuuu uuuu uuuu uuuu
SSP2ADD PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
SSP2STAT PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
SSP2CON1 PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
SSP2CON2 PIC18F6XJ1X PIC18F8XJ1X 0000 0000 0000 0000 uuuu uuuu
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR
Resets
WDT Reset
RESET Instruction
Stack Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.