Datasheet

 2003-2013 Microchip Technology Inc. DS30491D-page 77
PIC18F6585/8585/6680/8680
RXFBCON7
(7)
F15BP_3 F15BP_2 F15BP_1 F15BP_0 F14BP_3 F14BP_2 F14BP_1 F14BP_01 0000 0000 47, 230
RXFBCON6
(7)
F13BP_3 F13BP_2 F13BP_1 F13BP_0 F12BP_3 F12BP_2 F12BP_1 F12BP_01 0000 0000 47, 230
RXFBCON5
(7)
F11BP_3 F11BP_2 F11BP_1 F11BP_0 F10BP_3 F10BP_2 F10BP_1 F10BP_01 0000 0000 47, 230
RXFBCON4
(7)
F9BP_3 F9BP_2 F9BP_1 F9BP_0 F8BP_3 F8BP_2 F8BP_1 F8BP_01 0000 0000 47, 230
RXFBCON3
(7)
F7BP_3 F7BP_2 F7BP_1 F7BP_0 F6BP_3 F6BP_2 F6BP_1 F6BP_01 0000 0000 47, 230
RXFBCON2
(7)
F5BP_3 F5BP_2 F5BP_1 F5BP_0 F4BP_3 F4BP_2 F4BP_1 F4BP_01 0000 0000 47, 230
RXFBCON1
(7)
F3BP_3 F3BP_2 F3BP_1 F3BP_0 F2BP_3 F2BP_2 F2BP_1 F2BP_01 0000 0000 47, 230
RXFBCON0
(7)
F1BP_3 F1BP_2 F1BP_1 F1BP_0 F0BP_3 F0BP_2 F0BP_1 F0BP_01 0000 0000 47, 230
TABLE 4-3: REGISTER FILE SUMMARY (CONTINUED)
File Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Value on
POR, BOR
Details
on page:
Legend: x = unknown, u = unchanged, – = unimplemented, q = value depends on condition
Note 1: RA6 and associated bits are configured as port pins in RCIO and ECIO Oscillator mode only and read ‘0’ in all other oscillator
modes.
2: Bit 21 of the TBLPTRU allows access to the device configuration bits.
3: These registers are unused on PIC18F6X80 devices; always maintain these clear.
4: These bits have multiple functions depending on the CAN module mode selection.
5: Meaning of this register depends on whether this buffer is configured as transmit or receive.
6: RG5 is available as an input when MCLR
is disabled.
7: This register reads all ‘0’s until the ECAN module is set up in Mode 1 or Mode 2.
18F8680.book Page 77 Tuesday, January 29, 2013 1:32 PM