Datasheet

PIC18F6310/6410/8310/8410
DS39635C-page 354  2010 Microchip Technology Inc.
27.1 DC Characteristics: Supply Voltage
PIC18F6310/6410/8310/8410 (Industrial, Extended)
PIC18LF6310/6410/8310/8410 (Industrial)
PIC18LF6310/6410/8310/8410
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
PIC18F6310/6410/8310/8410
(Industrial, Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
V
DD Supply Voltage
D001 PIC18LFX310/X410 2.0 — 5.5 V
PIC18F6310/6410/8310/8410 4.2 — 5.5 V
D001B AVDD Analog Supply Voltage VDD – 0.3 VDD + 0.3 — V
D001C AV
SS AVSS Analog Ground
Voltage
VSS – 0.3 VSS + 0.3 — V
D002 V
DR RAM Data Retention
Voltage
(1)
1.5 — — V
D003 V
POR VDD Start Voltage
to Ensure Internal
Power-on Reset Signal
— — 0.7 V See Section 5.3 “Power-on Reset (POR)”
for details
D004 S
VDD VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05 — — V/ms See Section 5.3 “Power-on Reset (POR)”
for details
V
BOR Brown-out Reset Voltage
D005 BORV<1:0> = 11 1.96 2.06 2.16 V
BORV<1:0> = 10 2.64 2.78 2.92 V
BORV<1:0> = 01
(2)
4.11 4.33 4.55 V
BORV<1:0> = 00 4.41 4.64 4.87 V
Legend: Shading of rows is to assist in readability of the table.
Note 1: This is the limit to which V
DD can be lowered in Sleep mode, or during a device Reset, without losing RAM data.
2: With BOR enabled, full-speed operation (F
OSC = 40 MHz) is supported until a BOR occurs. This is valid although VDD
may be below the minimum voltage for this frequency.