Datasheet

PIC18F47J53 FAMILY
DS39964B-page 80 Preliminary  2010 Microchip Technology Inc.
RPOR5 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
RPOR4 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
RPOR3 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
RPOR2 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
RPOR1 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
RPOR0 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR
Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.
5: Not implemented for PIC18F2XJ53 devices.
6: Not implemented for “LF” devices.