Datasheet

 2010 Microchip Technology Inc. Preliminary DS39964B-page 515
PIC18F47J53 FAMILY
31.1 DC Characteristics: Supply Voltage PIC18F47J53 Family (Industrial)
PIC18F47J53 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
D001 V
DD
Supply Voltage
2.15 — 3.6 V
PIC18F4XJ53, PIC18F2XJ53
D001A V
DD
Supply Voltage
2.0 — 3.6 V
PIC18LF4XJ53, PIC18LF2XJ53
D001B V
DDCORE External Supply
for Microcontroller Core
2.0 — 2.75 V PIC18LF4XJ53, PIC18LF2XJ53
D001C AV
DD Analog Supply Voltage VDD – 0.3 — VDD + 0.3 V
D001D AVSS Analog Ground Potential VSS – 0.3 — VSS + 0.3 V
D001E VUSB USB Supply Voltage 3.0 3.3 3.6 V USB module enabled
(2)
D002 VDR RAM Data Retention
Voltage
(1)
1.5 — — V
D003 V
POR VDD Start Voltage
to Ensure Internal
Power-on Reset Signal
— — 0.7 V See Section 5.3 “Power-on
Reset (POR)” for details
D004 SVDD VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05 — — V/ms See Section 5.3 “Power-on
Reset (POR)” for details
D005 VBOR VDDCORE Brown-out Reset
Voltage
— 2.0 — V PIC18F4XJ53, PIC18F2XJ53
only
D006 V
DSBOR VDD Brown-out Reset
Voltage
— 1.8 — V DSBOREN = 1 on “LF” device or
“F” device in Deep Sleep
Note 1: This is the limit to which V
DDCORE can be lowered in Sleep mode, or during a device Reset, without losing RAM
data.
2: V
USB should always be maintained  VDD, but may be left floating when the USB module is disabled and
RC4/RC5 will not be used as general purpose inputs.