Datasheet
2010 Microchip Technology Inc. Preliminary DS39974A-page 79
PIC18F47J13 FAMILY
RPOR16 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR15 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR14 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR13 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR12 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR11 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR10 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR9 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR8 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR7 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR6 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR5 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR4 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR3 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR2 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR1 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
RPOR0 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu
PPSCON PIC18F2XJ13 PIC18F4XJ13 ---- ---0 ---- ---0 ---- ---u
PMDIS3 PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMDIS2 PIC18F2XJ13 PIC18F4XJ13 -0-0 0000 -0-0 0000 -u-u uuuu
PMDIS1 PIC18F2XJ13 PIC18F4XJ13 0000 000- 0000 000- uuuu uuu-
PMDIS0 PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
ADCTRIG PIC18F2XJ13 PIC18F4XJ13 ---- --00 ---- --00 ---- --uu
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR
Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for the Reset value for a specific condition.
5: Not implemented on PIC18F2XJ13 devices.
6: Not implemented on “LF” devices.