Datasheet

2010 Microchip Technology Inc. Preliminary DS39974A-page 487
PIC18F47J13 FAMILY
30.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on any digital only I/O pin or MCLR
with respect to VSS (except VDD) ........................................... -0.3V to 6.0V
Voltage on any combined digital and analog pin with respect to V
SS (except VDD)........................ -0.3V to (VDD + 0.3V)
Voltage on V
DDCORE with respect to VSS................................................................................................... -0.3V to 2.75V
Voltage on V
DD with respect to VSS ........................................................................................................... -0.3V to 4.0V
Total power dissipation (Note 1) ...............................................................................................................................1.0W
Maximum current out of V
SS pin ...........................................................................................................................300 mA
Maximum current into V
DD pin ..............................................................................................................................250 mA
Maximum output current sunk by any PORTB, PORTC and RA6 I/O pin...............................................................25mA
Maximum output current sunk by any PORTA (except RA6), PORTD and PORTE I/O pin......................................8 mA
Maximum output current sourced by any PORTB, PORTC and RA6 I/O pin .........................................................25 mA
Maximum output current sourced by any PORTA (except RA6), PORTD and PORTE I/O pin ................................8 mA
Maximum current sunk byall ports .......................................................................................................................200 mA
Maximum current sourced by all ports ..................................................................................................................200 mA
Note 1: Power dissipation is calculated as follows:
P
DIS = VDD x {IDD IOH} + {(VDD – VOH) x IOH} + (VOL x IOL)
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.