Datasheet

PIC18F47J13 FAMILY
DS39974A-page 468 Preliminary  2010 Microchip Technology Inc.
SLEEP Enter Sleep Mode
Syntax: SLEEP
Operands: None
Operation: 00h  WDT,
0  WDT postscaler,
1  TO
,
0  PD
Status Affected: TO, PD
Encoding: 0000 0000 0000 0011
Description: The Power-Down status bit (PD
) is
cleared. The Time-out status bit (TO
)
is set. The Watchdog Timer and its
postscaler are cleared.
The processor is put into Sleep mode
with the oscillator stopped.
Words: 1
Cycles: 1
Q Cycle Activity:
Q1 Q2 Q3 Q4
Decode No
operation
Process
Data
Go to
Sleep
Example:
SLEEP
Before Instruction
TO
=?
PD
=?
After Instruction
TO
= 1 †
PD
= 0
† If WDT causes wake-up, this bit is cleared.
SUBFWB Subtract f from W with Borrow
Syntax: SUBFWB f {,d {,a}}
Operands: 0 f 255
d  [0,1]
a  [0,1]
Operation: (W) – (f) – (C
) dest
Status Affected: N, OV, C, DC, Z
Encoding: 0101 01da ffff ffff
Description: Subtract register ‘f’ and Carry flag
(borrow) from W (2’s complement
method). If ‘d’ is ‘0’, the result is stored in
W. If ‘d’ is ‘1’, the result is stored in
register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank is selected. If
‘a’ is ‘1’, the BSR is used to select the
GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates in
Indexed Literal Offset Addressing mode
whenever f 95 (5Fh). See
Section 28.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words: 1
Cycles: 1
Q Cycle Activity:
Q1 Q2 Q3 Q4
Decode Read
register ‘f’
Process
Data
Write to
destination
Example 1:
SUBFWB REG, 1, 0
Before Instruction
REG = 3
W=2
C=1
After Instruction
REG = FF
W=2
C=0
Z=0
N = 1 ; result is negative
Example 2:
SUBFWB REG, 0, 0
Before Instruction
REG = 2
W=5
C=1
After Instruction
REG = 2
W=3
C=1
Z=0
N = 0 ; result is positive
Example 3:
SUBFWB REG, 1, 0
Before Instruction
REG = 1
W=2
C=0
After Instruction
REG = 0
W=2
C=1
Z = 1 ; result is zero
N=0