Datasheet

 2010 Microchip Technology Inc. Preliminary DS39974A-page 183
PIC18F47J13 FAMILY
REGISTER 11-4: PMMODEL: PARALLEL PORT MODE REGISTER LOW BYTE (BANKED F5Ch)
(1)
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
WAITB1
(2)
WAITB0
(2)
WAITM3 WAITM2 WAITM1 WAITM0 WAITE1
(2)
WAITE0
(2)
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 7-6 WAITB<1:0>: Data Setup to Read/Write Wait State Configuration bits
(2)
11 = Data Wait of 4 TCY; multiplexed address phase of 4 TCY
10 = Data Wait of 3 TCY; multiplexed address phase of 3 TCY
01 = Data Wait of 2 TCY; multiplexed address phase of 2 TCY
00 = Data Wait of 1 TCY; multiplexed address phase of 1 TCY
bit 5-2 WAITM<3:0>: Read to Byte Enable Strobe Wait State Configuration bits
1111 = Wait of additional 15 T
CY
.
.
.
0001 = Wait of additional 1 T
CY
0000 = No additional Wait cycles (operation forced into one TCY)
bit 1-0 WAITE<1:0>: Data Hold After Strobe Wait State Configuration bits
(2)
11 = Wait of 4 TCY
10 = Wait of 3 TCY
01 = Wait of 2 TCY
00 = Wait of 1 TCY
Note 1: This register is only available on 44-pin devices.
2: WAITBx and WAITEx bits are ignored whenever WAITM<3:0> = 0000.