Datasheet

 2010 Microchip Technology Inc. DS41303G-page 395
PIC18F2XK20/4XK20
FIGURE 26-15: EXAMPLE SPI SLAVE MODE TIMING (CKE = 1 )
TABLE 26-17: EXAMPLE SPI SLAVE MODE REQUIREMENTS (CKE = 1)
Param
No.
Symbol Characteristic Min Max Units Conditions
70 TssL2scH,
TssL2scL
SS
 to SCK  or SCK  Input TCY —ns
71 TscH SCK Input High Time
(Slave mode)
Continuous 1.25 T
CY + 30 — ns
71A Single Byte 40 — ns (Note 1)
72 TscL SCK Input Low Time
(Slave mode)
Continuous 1.25 T
CY + 30 — ns
72A Single Byte 40 — ns (Note 1)
73A Tb2b Last Clock Edge of Byte 1 to the First Clock Edge of Byte 2 1.5 T
CY + 40 — ns (Note 2)
74 TscH2diL,
TscL2diL
Hold Time of SDI Data Input to SCK Edge 100 — ns
75 TdoR SDO Data Output Rise Time — 25 ns
76 TdoF SDO Data Output Fall Time — 25 ns
77 TssH2doZ SS
 to SDO Output High-Impedance 10 50 ns
78 TscR SCK Output Rise Time
(Master mode)
—25ns
79 TscF SCK Output Fall Time (Master mode) — 25 ns
80 TscH2doV,
TscL2doV
SDO Data Output Valid after SCK Edge — 50 ns
82 TssL2doV SDO Data Output Valid after SS
 Edge — 50 ns
83 TscH2ssH
,
TscL2ssH
SS
 after SCK Edge 1.5 TCY + 40 — ns
Note 1: Requires the use of Parameter #73A.
2: Only if Parameter #71A and #72A are used.
SS
SCK
(CKP = 0)
SCK
(CKP = 1)
SDO
SDI
70
71 72
82
SDI
74
75, 76
MSb bit 6 - - - - - -1 LSb
77
MSb In bit 6 - - - -1 LSb In
80
83
Note: Refer to Figure 26-4 for load conditions.