Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller QFN 44 (8x8) 8-Bit 48 MHz I/O number 34

PIC18F47J53 FAMILY

DS39964B-page 78 Preliminary  2010 Microchip Technology Inc.

TMR8 PIC18F2XJ53 PIC18F4XJ53 0000 0000 — —

PR8 PIC18F2XJ53 PIC18F4XJ53 1111 1111 — —

T8CON PIC18F2XJ53 PIC18F4XJ53 -000 0000 — —

PSTR3CON PIC18F2XJ53 PIC18F4XJ53 00-0 0001 — —

ECCP3AS PIC18F2XJ53 PIC18F4XJ53 0000 0000 — —

ECCP3DEL PIC18F2XJ53 PIC18F4XJ53 0000 0000 — —

CCPR3H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR3L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP3CON PIC18F2XJ53 PIC18F4XJ53 0000 0000 — —

CCPR4H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR4L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP4CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

CCPR5H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR5L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP5CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

CCPR6H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR6L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP6CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

CCPR7H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR7L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP7CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

CCPR8H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR8L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP8CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

CCPR9H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR9L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP9CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

CCPR10H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCPR10L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —

CCP10CON PIC18F2XJ53 PIC18F4XJ53 --00 0000 — —

RPINR24 PIC18F2XJ53 PIC18F4XJ53 ---1 1111 ---1 1111 ---u uuuu

RPINR23 PIC18F2XJ53 PIC18F4XJ53 ---1 1111 ---1 1111 ---u uuuu

TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)

Power-on Reset,

Brown-out Reset,

Wake From Deep

Sleep

MCLR

Resets

WDT Reset

RESET Instruction

Stack Resets

CM Resets

Wake-up via WDT

or Interrupt

Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.

Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are

updated with the current value of the PC. The STKPTR is modified to point to the next location in the

hardware stack.

2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt

vector (0008h or 0018h).

3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).

4: See Table 5-1 for Reset value for specific condition.

5: Not implemented for PIC18F2XJ53 devices.

6: Not implemented for “LF” devices.