Datasheet

 2011 Microchip Technology Inc. DS39931D-page 503
PIC18F46J50 FAMILY
VOL Output Low Voltage
D080 I/O Ports:
PORTA (except RA6),
PORTD, PORTE
—0.4VI
OL = 2 mA, VDD = 3.3V,
-40C to +85C
PORTB, PORTC, RA6 — 0.4 V I
OL = 8.5 mA, VDD = 3.3V,
-40C to +85C
V
OH Output High Voltage
D090 I/O Ports: V
PORTA (except RA6),
PORTD, PORTE
2.4 — V I
OH = -2 mA, VDD = 3.3V,
-40C to +85C
PORTB, PORTC, RA6 2.4 — V I
OH = -6 mA, VDD = 3.3V,
-40C to +85C
Capacitive Loading Specs
on Output Pins
D101 CIO All I/O Pins and OSC2 — 50 pF To meet the AC Timing
Specifications
D102 C
B SCLx, SDAx — 400 pF I
2
C™ Specification
30.3 DC Characteristics:PIC18F46J50 Family (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A  +85°C for industrial
Param
No.
Symbol Characteristic Min Max Units Conditions
Note 1: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
2: Negative current is defined as current sourced by the pin.
3: Only available on 44-pin devices.
4: When used as general purpose inputs, the RC4 and RC5 thresholds are referenced to V
USB instead of VDD.
5: Refer to Table 10-2 for pin tolerance levels.