Datasheet

PIC18F2XK20/4XK20
DS41303G-page 378  2010 Microchip Technology Inc.
IPU Weak Pull-up Current
D070 IPURB PORTB weak pull-up
current
50 90 400 AVDD = 3.0V, VPIN =
V
SS
26.9 DC Characteristics: Input/Output Characteristics, PIC18F2XK20/4XK20 (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A  +125°C
Param
No.
Symbol Characteristic Min
Typ† Max Units Conditions
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that
the PIC
®
device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.