Datasheet

PIC18F2XK20/4XK20
DS41303G-page 122  2010 Microchip Technology Inc.
TABLE 10-1: PORTA I/O SUMMARY
Pin Function
TRIS
Setting
I/O
I/O
Type
Description
RA0/AN0/C12IN0- RA0 0 O DIG LATA<0> data output; not affected by analog input.
1 I TTL PORTA<0> data input; disabled when analog input enabled.
AN0 1 I ANA ADC input channel 0. Default input configuration on POR; does not
affect digital output.
C12IN0- 1 I ANA Comparators C1 and C2 inverting input, channel 0. Analog select is
shared with ADC.
RA1/AN1/C12IN1- RA1 0 O DIG LATA<1> data output; not affected by analog input.
1 I TTL PORTA<1> data input; disabled when analog input enabled.
AN1 1 I ANA ADC input channel 1. Default input configuration on POR; does not
affect digital output.
C12IN1- 1 I ANA Comparators C1 and C2 inverting input, channel 1. Analog select is
shared with ADC.
RA2/AN2/C2IN+
V
REF-/CVREF
RA2 0 O DIG LATA<2> data output; not affected by analog input. Disabled when
CV
REF output enabled.
1 I TTL PORTA<2> data input. Disabled when analog functions enabled;
disabled when CV
REF output enabled.
AN2 1 I ANA ADC input channel 2. Default input configuration on POR; not affected
by analog output.
C2IN+ 1 I ANA Comparator C2 non-inverting input. Analog selection is shared with
ADC.
V
REF- 1 I ANA ADC and comparator voltage reference low input.
CV
REF x O ANA Comparator voltage reference output. Enabling this feature disables
digital I/O.
RA3/AN3/C1IN+/
V
REF+
RA3 0 O DIG LATA<3> data output; not affected by analog input.
1 I TTL PORTA<3> data input; disabled when analog input enabled.
AN3 1 I ANA A/D input channel 3. Default input configuration on POR.
C1IN+ 1 I ANA Comparator C1 non-inverting input. Analog selection is shared with
ADC.
V
REF+ 1 I ANA ADC and comparator voltage reference high input.
RA4/T0CKI/C1OUT RA4 0 O DIG LATA<4> data output.
1 I ST PORTA<4> data input; default configuration on POR.
T0CKI 1 I ST Timer0 clock input.
C1OUT 0 O DIG Comparator 1 output; takes priority over port data.
RA5/AN4/SS
/
HLVDIN/C2OUT
RA5 0 O DIG LATA<5> data output; not affected by analog input.
1 I TTL PORTA<5> data input; disabled when analog input enabled.
AN4 1 I ANA A/D input channel 4. Default configuration on POR.
SS
1 I TTL Slave select input for SSP (MSSP module).
HLVDIN 1 I ANA Low-Voltage Detect external trip point input.
C2OUT 0 O DIG Comparator 2 output; takes priority over port data.
OSC2/CLKOUT/
RA6
RA6 0 O DIG LATA<6> data output. Enabled in RCIO, INTIO2 and ECIO modes only.
1 I TTL PORTA<6> data input. Enabled in RCIO, INTIO2 and ECIO modes
only.
OSC2 x O ANA Main oscillator feedback output connection (XT, HS and LP modes).
CLKOUT x O DIG System cycle clock output (F
OSC/4) in RC, INTIO1 and EC Oscillator
modes.
Legend: DIG = Digital level output; TTL = TTL input buffer; ST = Schmitt Trigger input buffer; ANA = Analog level input/output;
x = Don’t care (TRIS bit does not affect port direction or is overridden for this option).