Datasheet

PIC18F45J10 FAMILY

CONTROL REGISTER

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

ECCPASE ECCPAS2 ECCPAS1 ECCPAS0 PSSAC1 PSSAC0 PSSBD1

(1)

PSSBD0

(1)

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7 ECCPASE: ECCP Auto-Shutdown Event Status bit

1 = A shutdown event has occurred; ECCP outputs are in shutdown state

0 = ECCP outputs are operating

bit 6-4 ECCPAS<2:0>: ECCP Auto-Shutdown Source Select bits

111 = FLT0, Comparator 1 or Comparator 2

110 = FLT0 or Comparator 2

101 = FLT0 or Comparator 1

100 =FLT0

011 = Either Comparator 1 or 2

010 = Comparator 2 output

001 = Comparator 1 output

000 = Auto-shutdown is disabled

bit 3-2 PSSAC<1:0>: Pins A and C Shutdown State Control bits

1x = Pins A and C are tri-state (40/44-pin devices); PWM output is tri-state (28-pin devices)

01 = Drive Pins A and C to ‘1’

00 = Drive Pins A and C to ‘0’

bit 1-0 PSSBD<1:0>: Pins B and D Shutdown State Control bits

(1)

1x = Pins B and D tri-state

01 = Drive Pins B and D to ‘1’

00 = Drive Pins B and D to ‘0’

Note 1: Reserved on 28-pin devices; maintain these bits clear.