Datasheet

PIC18F2585/2680/4585/4680
DS39625C-page 334 Preliminary © 2007 Microchip Technology Inc.
Table 23-3 shows the relation between the clock
generated by the PLL and the frequency error from jitter
(measured jitter-induced error of 2%, Gaussian distribu-
tion, within 3 standard deviations), as a percentage of
the nominal clock frequency.
This is clearly smaller than the expected drift of a crystal
oscillator, typically specified at 100 ppm or 0.01%. If we
add jitter to oscillator drift, we have a total frequency drift
of 0.0132%. The total oscillator frequency errors for
common clock frequencies and bit rates, including both
drift and jitter, are shown in Table 23-4.
TABLE 23-3: FREQUENCY ERROR FROM JITTER AT VARIOUS PLL GENERATED CLOCK SPEEDS
TABLE 23-4: TOTAL FREQUENCY ERROR AT VARIOUS PLL GENERATED CLOCK SPEEDS
(100 PPM OSCILLATOR DRIFT, INCLUDING ERROR FROM JITTER)
PLL
Output
P
jitter
T
jitter
Frequency Error at Various Nominal Bit Times (Bit Rates)
8 μs
(125 Kb/s)
4 μs
(250 Kb/s)
2 μs
(500 Kb/s)
1 μs
(1 Mb/s)
40 MHz 0.5 ns 1 ns 0.00125% 0.00250% 0.005% 0.01%
24 MHz 0.83 ns 1.67 ns 0.00209% 0.00418% 0.008% 0.017%
16 MHz 1.25 ns 2.5 ns 0.00313% 0.00625% 0.013% 0.025%
Nominal PLL Output
Frequency Error at Various Nominal Bit Times (Bit Rates)
8 μs
(125 Kb/s)
4 μs
(250 Kb/s)
2 μs
(500 Kb/s)
1 μs
(1 Mb/s)
40 MHz 0.01125% 0.01250% 0.015% 0.02%
24 MHz 0.01209% 0.01418% 0.018% 0.027%
16 MHz 0.01313% 0.01625% 0.023% 0.035%