Datasheet

PIC18F2585/2680/4585/4680
DS39625C-page 292 Preliminary © 2007 Microchip Technology Inc.
REGISTER 23-19: RXBnDLC: RECEIVE BUFFER n DATA LENGTH CODE REGISTERS [0 ≤ n ≤ 1 ]
REGISTER 23-20: RXBnDm: RECEIVE BUFFER n DATA FIELD BYTE m REGISTERS
[0 ≤ n ≤ 1, 0 ≤ m ≤ 7]
U-0 R-x R-x R-x R-x R-x R-x R-x
— RXRTR RB1 RB0 DLC3 DLC2 DLC1 DLC0
bit 7 bit 0
bit 7 Unimplemented: Read as ‘0’
bit 6 RXRTR: Receiver Remote Transmission Request bit
1 = Remote transfer request
0 = No remote transfer request
bit 5 RB1: Reserved bit 1
Reserved by CAN Spec and read as ‘0’.
bit 4 RB0: Reserved bit 0
Reserved by CAN Spec and read as ‘0’.
bit 3-0 DLC3:DLC0: Data Length Code bits
1111 = Invalid
1110 = Invalid
1101 = Invalid
1100 = Invalid
1011 = Invalid
1010 = Invalid
1001 = Invalid
1000 = Data length = 8 bytes
0111 = Data length = 7 bytes
0110 = Data length = 6 bytes
0101 = Data length = 5 bytes
0100 = Data length = 4 bytes
0011 = Data length = 3 bytes
0010 = Data length = 2 bytes
0001 = Data length = 1 bytes
0000 = Data length = 0 bytes
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
R-x R-x R-x R-x R-x R-x R-x R-x
RXBnDm7 RXBnDm6 RXBnDm5 RXBnDm4 RXBnDm3 RXBnDm2 RXBnDm1 RXBnDm0
bit 7 bit 0
bit 7-0 RXBnDm7:RXBnDm0: Receive Buffer n Data Field Byte m bits (where 0 ≤ n < 1 and 0 < m < 7)
Each receive buffer has an array of registers. For example, Receive Buffer 0 has 8 registers:
RXB0D0 to RXB0D7.
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown