Datasheet

PIC18FXX2
DS39564C-page 212 © 2006 Microchip Technology Inc.
TABLE 20-1: OPCODE FIELD DESCRIPTIONS
Field Description
a RAM access bit
a = 0: RAM location in Access RAM (BSR register is ignored)
a = 1: RAM bank is specified by BSR register
bbb Bit address within an 8-bit file register (0 to 7)
BSR Bank Select Register. Used to select the current RAM bank.
d Destination select bit;
d = 0: store result in WREG,
d = 1: store result in file register f.
dest Destination either the WREG register or the specified register file location
f 8-bit Register file address (0x00 to 0xFF)
fs 12-bit Register file address (0x000 to 0xFFF). This is the source address.
fd 12-bit Register file address (0x000 to 0xFFF). This is the destination address.
k Literal field, constant data or label (may be either an 8-bit, 12-bit or a 20-bit value)
label Label name
mm The mode of the TBLPTR register for the Table Read and Table Write instructions.
Only used with Table Read and Table Write instructions:
* No Change to register (such as TBLPTR with Table reads and writes)
*+ Post-Increment register (such as TBLPTR with Table reads and writes)
*- Post-Decrement register (such as TBLPTR with Table reads and writes)
+* Pre-Increment register (such as TBLPTR with Table reads and writes)
n The relative address (2’s complement number) for relative branch instructions, or the direct address for
Call/Branch and Return instructions
PRODH Product of Multiply high byte
PRODL Product of Multiply low byte
s Fast Call/Return mode select bit.
s = 0: do not update into/from shadow registers
s = 1: certain registers loaded into/from shadow registers (Fast mode)
u Unused or Unchanged
WREG Working register (accumulator)
x Don't care (0 or 1)
The assembler will generate code with x = 0. It is the recommended form of use for compatibility with all
Microchip software tools.
TBLPTR 21-bit Table Pointer (points to a Program Memory location)
TABLAT 8-bit Table Latch
TOS Top-of-Stack
PC Program Counter
PCL Program Counter Low Byte
PCH Program Counter High Byte
PCLATH Program Counter High Byte Latch
PCLATU Program Counter Upper Byte Latch
GIE Global Interrupt Enable bit
WDT Watchdog Timer
TO
Time-out bit
PD
Power-down bit
C, DC, Z, OV, N ALU status bits Carry, Digit Carry, Zero, Overflow, Negative
[ ] Optional
( ) Contents
→ Assigned to
< > Register bit field
∈ In the set of
italics User defined term (font is courier)