Datasheet
2011 Microchip Technology Inc. DS39932D-page 477
PIC18F46J11 FAMILY
PIC18LFXXJ11 12.5 45 A-40°C
V
DD = 2.5V,
V
DDCORE = 2.5V
F
OSC = 32 kHz
(3)
SEC_RUN mode,
LPT1OSC = 0
11.7 45 A+25°C
5.2 61 A+85°C
PIC18FXXJ11 40.2 95 A -40°C
VDD = 2.15V,
V
DDCORE = 10 F
Capacitor
50.2 95 A +25°C
61.9 105 A +85°C
PIC18LFXXJ11 44.4 110 A-40°C
V
DD = 3.3V,
V
DDCORE = 10 F
Capacitor
53.1 110 A+25°C
55.8 150 A+85°C
PIC18FXXJ11 4.5 31 A -40°C
VDD = 2.5V,
V
DDCORE = 2.5V
F
OSC = 32 kHz
(3)
SEC_IDLE mode,
LPT1OSC = 0
3.8 31 A +25°C
4.1 50 A +85°C
PIC18FXXJ11 34.7 87 A -40°C
VDD = 2.15V,
V
DDCORE = 10 F
Capacitor
44.6 89 A +25°C
56.5 97 A +85°C
PIC18LFXXJ11 37.3 100 A-40°C
V
DD = 3.3V,
V
DDCORE = 10 F
Capacitor
45.7 100 A+25°C
54.6 140 A+85°C
29.2 DC Characteristics: Power-Down and Supply Current
PIC18F46J11 Family (Industrial) (Continued)
PIC18LFXXJ11 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
PIC18FXXJ11 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
Param
No.
Device Typ Max Units Conditions
Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured
with the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD or VSS and all features that
add delta current disabled (such as WDT, Timer1 oscillator, BOR, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature,
also have an impact on the current consumption. All features that add delta current are disabled (WDT, etc.). The
test conditions for all I
DD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to V
DD/VSS;
MCLR
= VDD; WDT disabled unless otherwise specified.
3: Low-Power Timer1 with standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to
+70°C. Extended temperature crystals are available at a much higher cost.