Datasheet

PIC18F46J11 FAMILY
DS39932D-page 470  2011 Microchip Technology Inc.
29.2 DC Characteristics: Power-Down and Supply Current
PIC18F46J11 Family (Industrial)
PIC18LFXXJ11 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
PIC18FXXJ11 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
Param
No.
Device Typ Max Units Conditions
Power-Down Current (IPD)
(1)
– Sleep mode
PIC18LFXXJ11 0.011 1.4 A -40°C
V
DD = 2.0V,
V
DDCORE = 2.0V
Sleep mode,
REGSLP = 1
0.054 1.4 A+25°C
0.51 6 A+60°C
2.0 10.2 A+85°C
PIC18LFXXJ11 0.029 1.5 A-40°C
V
DD = 2.5V,
V
DDCORE = 2.5V
0.11 1.5 A+25°C
0.63 8 A+60°C
2.30 12.6 A+85°C
PIC18FXXJ11 2.5 6 A -40°C
VDD = 2.15V,
V
DDCORE = 10 F
Capacitor
3.1 6 A +25°C
3.9 8 A +60°C
5.6 16 A +85°C
PIC18FXXJ11 4.1 7 A -40°C
VDD = 3.3V,
V
DDCORE = 10 F
Capacitor
3.3 7 A +25°C
4.1 10 A +60°C
6.0 19 A +85°C
Power-Down Current (IPD)
(1)
– Deep Sleep mode
PIC18FXXJ11 1 25 nA -40°C
VDD = 2.15V,
VDDCORE = 10 F
Capacitor
Deep Sleep mode
13 100 nA +25°C
108 250 nA +60°C
428 1000 nA +85°C
PIC18FXXJ11 3 50 nA -40°C
VDD = 3.3V,
V
DDCORE = 10 F
Capacitor
28 150 nA +25°C
170 389 nA +60°C
588 2000 nA +85°C
Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured
with the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD or VSS and all features that
add delta current disabled (such as WDT, Timer1 oscillator, BOR, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature,
also have an impact on the current consumption. All features that add delta current are disabled (WDT, etc.). The
test conditions for all I
DD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to V
DD/VSS;
MCLR
= VDD; WDT disabled unless otherwise specified.
3: Low-Power Timer1 with standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to
+70°C. Extended temperature crystals are available at a much higher cost.