Datasheet

 2011 Microchip Technology Inc. DS39932D-page 449
PIC18F46J11 FAMILY
SUBLW Subtract W from Literal
Syntax: SUBLW k
Operands: 0 k 255
Operation: k – (W) W
Status Affected: N, OV, C, DC, Z
Encoding: 0000 1000 kkkk kkkk
Description: W is subtracted from the eight-bit
literal ‘k’. The result is placed in W.
Words: 1
Cycles: 1
Q Cycle Activity:
Q1 Q2 Q3 Q4
Decode Read
literal ‘k’
Process
Data
Write to
W
Example 1:
SUBLW 0x02
Before Instruction
W = 01h
C=?
After Instruction
W = 01h
C = 1 ; result is positive
Z=0
N=0
Example 2:
SUBLW 0x02
Before Instruction
W = 02h
C=?
After Instruction
W = 00h
C = 1 ; result is zero
Z=1
N=0
Example 3:
SUBLW 0x02
Before Instruction
W = 03h
C=?
After Instruction
W = FFh ; (2’s complement)
C = 0 ; result is negative
Z=0
N=1
SUBWF Subtract W from f
Syntax: SUBWF f {,d {,a}}
Operands: 0 f 255
d  [0,1]
a  [0,1]
Operation: (f) – (W) dest
Status Affected: N, OV, C, DC, Z
Encoding: 0101 11da ffff ffff
Description: Subtract W from register ‘f’ (2’s
complement method). If ‘d’ is ‘0’, the
result is stored in W. If ‘d’ is ‘1’, the result
is stored back in register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f 95 (5Fh). See
Section 27.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words: 1
Cycles: 1
Q Cycle Activity:
Q1 Q2 Q3 Q4
Decode Read
register ‘f’
Process
Data
Write to
destination
Example 1:
SUBWF REG, 1, 0
Before Instruction
REG = 3
W=2
C=?
After Instruction
REG = 1
W=2
C = 1 ; result is positive
Z=0
N=0
Example 2:
SUBWF REG, 0, 0
Before Instruction
REG = 2
W=2
C=?
After Instruction
REG = 2
W=0
C = 1 ; result is zero
Z=1
N=0
Example 3:
SUBWF REG, 1, 0
Before Instruction
REG = 1
W=2
C=?
After Instruction
REG = FFh ;(2’s complement)
W=2
C = 0 ; result is negative
Z=0
N=1