Datasheet

PIC18F2450/4450
© 2008 Microchip Technology Inc. DS39760D-page 21
PORTE is a bidirectional I/O port.
RE0/AN5
RE0
AN5
82525
I/O
I
ST
Analog
Digital I/O.
Analog input 5.
RE1/AN6
RE1
AN6
92626
I/O
I
ST
Analog
Digital I/O.
Analog input 6.
RE2/AN7
RE2
AN7
10 27 27
I/O
I
ST
Analog
Digital I/O.
Analog input 7.
RE3 — — — — — See MCLR
/VPP/RE3 pin.
VSS 12, 31 6, 30,
31
6, 29 P — Ground reference for logic and I/O pins.
V
DD 11, 32 7, 8,
28, 29
7, 28 P — Positive supply for logic and I/O pins.
V
USB 18 37 37 P — Internal USB 3.3V voltage regulator output. Positive
supply for internal USB transceiver.
NC/ICCK/ICPGC
(1)
ICCK
ICPGC
——12
I/O
I/O
ST
ST
No Connect or dedicated ICD/ICSP™ port clock.
In-Circuit Debugger clock.
ICSP programming clock.
NC/ICDT/ICPGD
(1)
ICDT
ICPGD
——13
I/O
I/O
ST
ST
No Connect or dedicated ICD/ICSP port clock.
In-Circuit Debugger data.
ICSP programming data.
NC/ICRST/ICVPP
(1)
ICRST
ICVPP
——33
I
P
—
—
No Connect or dedicated ICD/ICSP port Reset.
Master Clear (Reset) input.
Programming voltage input.
NC/ICPORTS
(1)
ICPORTS
— — 34 P — No Connect or 28-pin device emulation.
Enable 28-pin device emulation when connected
to V
SS.
NC — 13 — — — No Connect.
TABLE 1-3: PIC18F4450 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number
Pin
Type
Buffer
Type
Description
PDIP QFN TQFP
Legend: TTL = TTL compatible input CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels I = Input
O = Output P = Power
Note 1: These pins are No Connect unless the ICPRT Configuration bit is set. For NC/ICPORTS, the pin is No
Connect unless ICPRT is set and the DEBUG
Configuration bit is cleared.