Datasheet

PIC18F2450/4450

9.4 PORTD, TRISD and LATD

Registers

PORTD is an 8-bit wide, bidirectional port. The

corresponding Data Direction register is TRISD.

Setting a TRISD bit (= 1) will make the corresponding

PORTD pin an input (i.e., put the corresponding output

driver in a high-impedance mode). Clearing a TRISD

bit (= 0) will make the corresponding PORTD pin an

output (i.e., put the contents of the output latch on the

selected pin).

The Output Latch register (LATD) is also memory

mapped. Read-modify-write operations on the LATD

PORTD.

All pins on PORTD are implemented with Schmitt

Trigger input buffers. Each pin is individually

configurable as an input or output.

EXAMPLE 9-4: INITIALIZING PORTD

Note: PORTD is only available on 40/44-pin

devices.

Note: On a Power-on Reset, these pins are

configured as digital inputs.

CLRF PORTD ; Initialize PORTD by

; clearing output

; data latches

CLRF LATD ; Alternate method

; to clear output

; data latches

MOVLW 0CFh ; Value used to

; initialize data

; direction

MOVWF TRISD ; Set RD<3:0> as inputs

; RD<5:4> as outputs

; RD<7:6> as inputs