Datasheet
2010 Microchip Technology Inc. Preliminary DS39964B-page 77
PIC18F47J53 FAMILY
REFOCON PIC18F2XJ53 PIC18F4XJ53 0-00 0000 u-uu uuuu u-uu uuuu
PADCFG1 PIC18F2XJ53 PIC18F4XJ53 ---- -000 ---- -uuu ---- -uuu
RTCVALH PIC18F2XJ53 PIC18F4XJ53 0xxx xxxx 0uuu uuuu 0uuu uuuu
RTCVALL PIC18F2XJ53 PIC18F4XJ53 0xxx xxxx 0uuu uuuu 0uuu uuuu
UCFG PIC18F2XJ53 PIC18F4XJ53 00-0 0000 00-0 0000 uu-u uuuu
UADDR PIC18F2XJ53 PIC18F4XJ53 -000 0000 -uuu uuuu -uuu uuuu
UEIE PIC18F2XJ53 PIC18F4XJ53 0--0 0000 0--0 0000 u--u uuuu
UIE PIC18F2XJ53 PIC18F4XJ53 -000 0000 -000 0000 -uuu uuuu
UEP15 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP14 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP13 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP12 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP11 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP10 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP9 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP8 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP7 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP6 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP5 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP4 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP3 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP2 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP1 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
UEP0 PIC18F2XJ53 PIC18F4XJ53 ---0 0000 ---0 0000 ---u uuuu
CM3CON PIC18F2XJ53 PIC18F4XJ53 0001 1111 uuuu uuuu uuuu uuuu
TMR5H PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —
TMR5L PIC18F2XJ53 PIC18F4XJ53 xxxx xxxx — —
T5CON PIC18F2XJ53 PIC18F4XJ53 0000 0000 — —
T5GCON PIC18F2XJ53 PIC18F4XJ53 0000 0x00 — —
TMR6 PIC18F2XJ53 PIC18F4XJ53 0000 0000 — —
PR6 PIC18F2XJ53 PIC18F4XJ53 1111 1111 — —
T6CON PIC18F2XJ53 PIC18F4XJ53 -000 0000 — —
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR
Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.
5: Not implemented for PIC18F2XJ53 devices.
6: Not implemented for “LF” devices.