Datasheet
PIC18F47J13 FAMILY
DS39974A-page 490 Preliminary 2010 Microchip Technology Inc.
30.2 DC Characteristics: Power-Down and Supply Current
PIC18F47J13 Family (Industrial)
PIC18LF47J13 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
PIC18F47J13 Family
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
Param
No.
Device Typ Max Units Conditions
Power-Down Current (IPD)
(1)
– Sleep mode
PIC18LFXXJ13 0.1 1.6 A -40°C
V
DD = 2.0V,
V
DDCORE = 2.0V
Sleep mode,
REGSLP = 1
0.2 1.6 A +25°C
0.8 7.0 A +60°C
2.1 11.5 A +85°C
PIC18LFXXJ13 0.2 2.0 A -40°C
V
DD = 2.5V,
V
DDCORE = 2.5V
0.5 2.0 A +25°C
1.4 9.0 A +60°C
3.2 15.0 A +85°C
PIC18FXXJ13 3.0 6.0 A -40°C
VDD = 2.15V
V
DDCORE = 10 F
Capacitor
3.8 6.0 A +25°C
4.7 9.0 A +60°C
6.4 18.5 A +85°C
PIC18FXXJ13 3.3 9.0 A -40°C
VDD = 3.3V
V
DDCORE = 10 F
Capacitor
4.2 9.0 A +25°C
5.5 12.0 A +60°C
7.8 22.0 A +85°C
Power-Down Current (IPD)
(1)
– Deep Sleep mode
PIC18FXXJ13 2 25 nA -40°C
VDD = 2.15V,
V
DDCORE = 10 F
Capacitor
Deep Sleep mode
9 100 nA +25°C
72 250 nA +60°C
262 1000 nA +85°C
PIC18FXXJ13 17 50 nA -40°C
VDD = 3.3V,
V
DDCORE = 10 F
Capacitor
53 150 nA +25°C
186 400 nA +60°C
503 2000 nA +85°C
Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured
with the part in Sleep mode, with all I/O pins in a high-impedance state and tied to V
DD or VSS, and all features
that add delta current are disabled (such as WDT, Timer1 oscillator, BOR, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature,
also have an impact on the current consumption. All features that add delta current are disabled (such as WDT).
The test conditions for all I
DD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to V
DD/VSS;
MCLR
= VDD; WDT disabled unless otherwise specified.
3: Low-power Timer1 with standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to
+70°C. Extended temperature crystals are available at a much higher cost.