Datasheet

PIC18F47J13 FAMILY
DS39974A-page 396 Preliminary  2010 Microchip Technology Inc.
25.6 Operation During Sleep
When enabled, the HLVD circuitry continues to operate
during Sleep. If the device voltage crosses the trip
point, the HLVDIF bit will be set and the device will
wake-up from Sleep. Device execution will continue
from the interrupt vector address if interrupts have
been globally enabled.
25.7 Effects of a Reset
A device Reset forces all registers to their Reset state.
This forces the HLVD module to be turned off.
TABLE 25-1: REGISTERS ASSOCIATED WITH HIGH/LOW-VOLTAGE DETECT MODULE
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
HLVDCON VDIRMAG BGVST IRVST HLVDEN HLVDL3 HLVDL2 HLVDL1 HLVDL0
INTCON GIE/GIEH PEIE/GIEL TMR0IE INT0IE RBIE TMR0IF INT0IF RBIF
PIR2 OSCFIF CM2IF CM1IF — BCL1IF HLVDIF TMR3IF CCP2IF
PIE2 OSCFIE CM2IE CM1IE — BCL1IE HLVDIE TMR3IE CCP2IE
IPR2
OSCFIP CM2IP CM1IP — BCL1IP HLVDIP TMR3IP CCP2IP
Legend: — = unimplemented, read as ‘0’. Shaded cells are unused by the HLVD module.