Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller SOIC 28 8-Bit 48 MHz I/O number 22

PIC18F47J13 FAMILY

DS39974A-page 78 Preliminary  2010 Microchip Technology Inc.

CCPR9H PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu

CCPR9L PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu

CCP9CON PIC18F2XJ13 PIC18F4XJ13 --00 0000 --00 0000 --uu uuuu

CCPR10H PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu

CCPR10L PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu

CCP10CON PIC18F2XJ13 PIC18F4XJ13 --00 0000 --00 0000 --uu uuuu

RPINR24 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR23 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR22 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR21 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR17 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR16 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR14 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR13 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR12 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR9 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR8 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR7 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR15 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR6 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR4 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR3 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR2 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPINR1 PIC18F2XJ13 PIC18F4XJ13 ---1 1111 ---1 1111 ---u uuuu

RPOR24 — PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR23 — PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR22 — PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR21 — PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR20 — PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR19 — PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR18 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

RPOR17 PIC18F2XJ13 PIC18F4XJ13 ---0 0000 ---0 0000 ---u uuuu

TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)

Power-on Reset,

Brown-out Reset,

Wake From Deep

Sleep

MCLR

Resets

WDT Reset

RESET Instruction

Stack Resets

CM Resets

Wake-up via WDT

or Interrupt

Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.

Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are

updated with the current value of the PC. The STKPTR is modified to point to the next location in the

hardware stack.

2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt

vector (0008h or 0018h).

3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).

4: See Table 5-1 for the Reset value for a specific condition.

5: Not implemented on PIC18F2XJ13 devices.

6: Not implemented on “LF” devices.