Datasheet

 2010 Microchip Technology Inc. Preliminary DS39974A-page 75
PIC18F47J13 FAMILY
SPBRGH2 PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
BAUDCON2 PIC18F2XJ13 PIC18F4XJ13 0100 0-00 0100 0-00 uuuu u-uu
TMR3H PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu
TMR3L PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu
T3CON PIC18F2XJ13 PIC18F4XJ13 0000 0000 uuuu uuuu uuuu uuuu
TMR4 PIC18F2XJ13 PIC18F4XJ13 0000 0000 uuuu uuuu uuuu uuuu
PR4 PIC18F2XJ13 PIC18F4XJ13 1111 1111 1111 1111 uuuu uuuu
T4CON PIC18F2XJ13 PIC18F4XJ13 -000 0000 -000 0000 -uuu uuuu
SSP2BUF PIC18F2XJ13 PIC18F4XJ13 xxxx xxxx uuuu uuuu uuuu uuuu
SSP2ADD PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
SSP2MSK PIC18F2XJ13 PIC18F4XJ13 1111 1111 1111 1111 uuuu uuuu
SSP2STAT PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
SSP2CON1 PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
SSP2CON2 PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
CMSTAT PIC18F2XJ13 PIC18F4XJ13 ---- -111 ---- -111 ---- -uuu
PMADDRH
(5)
— PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMDOUT1H
(5)
— PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMADDRL — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMDOUT1L — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMDIN1H — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMDIN1L — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
TXADDRL PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
TXADDRH PIC18F2XJ13 PIC18F4XJ13 ---- 0000 ---- 0000 ---- uuuu
RXADDRL PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
RXADDRH PIC18F2XJ13 PIC18F4XJ13 ---- 0000 ---- 0000 ---- uuuu
DMABCL PIC18F2XJ13 PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
DMABCH PIC18F2XJ13 PIC18F4XJ13 ---- --00 ---- --00 ---- --uu
PMCONH PIC18F2XJ13 PIC18F4XJ13 0--0 0000 0--0 0000 u--u uuuu
PMCONL — PIC18F4XJ13 000- 0000 000- 0000 uuu- uuuu
PMMODEH — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMMODEL — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
PMDOUT2H — PIC18F4XJ13 0000 0000 0000 0000 uuuu uuuu
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR
Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for the Reset value for a specific condition.
5: Not implemented on PIC18F2XJ13 devices.
6: Not implemented on “LF” devices.