Datasheet

PIC18F47J13 FAMILY
DS39974A-page 284 Preliminary  2010 Microchip Technology Inc.
FIGURE 19-12: PWM AUTO-SHUTDOWN WITH FIRMWARE RESTART (PxRSEN = 0)
19.4.5 AUTO-RESTART MODE
The Enhanced PWM can be configured to automatically
restart the PWM signal once the auto-shutdown condi-
tion has been removed. Auto-restart is enabled by
setting the PxRSEN bit (ECCPxDEL<7>).
If auto-restart is enabled, the ECCPxASE bit will
remain set as long as the auto-shutdown condition is
active. When the auto-shutdown condition is removed,
the ECCPxASE bit will be cleared via hardware and
normal operation will resume.
The module will wait until the next PWM period begins,
however, before re-enabling the output pin. This behav-
ior allows the auto-shutdown with auto-restart features
to be used in applications based on the current mode
of PWM control.
FIGURE 19-13: PWM AUTO-SHUTDOWN WITH AUTO-RESTART ENABLED (PxRSEN = 1)
Shutdown
PWM
ECCPxASE bit
Activity
Event
Shutdown
Event Occurs
Shutdown
Event Clears
PWM
Resumes
Normal PWM
Start of
PWM Period
ECCPxASE
Cleared by
Firmware
PWM Period
Shutdown
PWM
ECCPxASE bit
Activity
Event
Shutdown
Event Occurs
Shutdown
Event Clears
PWM
Resumes
Normal PWM
Start of
PWM Period
PWM Period