Datasheet

 2010 Microchip Technology Inc. Preliminary DS39974A-page 109

PIC18F47J13 FAMILY

U-0 U-0 R/W-0 R/W-0 R/W-x R/W-0 R/S-0 U-0

— — WPROG FREE WRERR WREN WR —

bit 7 bit 0

Legend: S = Settable bit (cannot be cleared in software)

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7-6 Unimplemented: Read as ‘0’

bit 5 WPROG: One Word-Wide Program bit

1 = Program 2 bytes on the next WR command

0 = Program 64 bytes on the next WR command

bit 4 FREE: Flash Erase Enable bit

1 = Perform an erase operation on the next WR command (cleared by hardware after completion of erase)

0 = Perform write-only

bit 3 WRERR: Flash Program Error Flag bit

1 = A write operation is prematurely terminated (any Reset during self-timed programming in normal

operation or an improper write attempt)

0 = The write operation completed

bit 2 WREN: Flash Program Write Enable bit

1 = Allows write cycles to Flash program memory

0 = Inhibits write cycles to Flash program memory

bit 1 WR: Write-Control bit

1 = Initiates a program memory erase cycle or write cycle

(The operation is self-timed and the bit is cleared by hardware once the write is complete. The WR

bit can only be set (not cleared) in software.)

0 = Write cycle is complete

bit 0 Unimplemented: Read as ‘0’