Datasheet

PIC18F66K80 FAMILY
DS39977F-page 458  2010-2012 Microchip Technology Inc.
TABLE 28-1: CONFIGURATION BITS AND DEVICE IDs
File Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Default/
Unprogrammed
Value
300000h CONFIG1L —XINST — SOSCSEL1 SOSCSEL0 INTOSCSEL —RETEN -1-1 11-1
300001h CONFIG1H IESO FCMEN — PLLCFG FOSC3 FOSC2 FOSC1 FOSC0 00-0 1000
300002h CONFIG2L — BORPWR1 BORWPR0 BORV1 BORV0 BOREN1 BOREN0 PWRTEN -111 1111
300003h CONFIG2H — WDTPS4 WDTPS3 WDTPS2 WDTPS1 WDTPS0 WDTEN1 WDTEN0 -111 1111
300005h CONFIG3H MCLRE — — — MSSPMSK T3CKMX
(1,3)
T0CKMX
(1)
CANMX 1--- 1qq1
300006h CONFIG4L DEBUG — —BBSIZ0— — —STVREN 1--1 ---1
300008h CONFIG5L — — — — CP3 CP2 CP1 CP0 ---- 1111
300009h CONFIG5H CPD CPB — — — — — — 11-- ----
30000Ah CONFIG6L — — — — WRT3 WRT2 WRT1 WRT0 ---- 1111
30000Bh CONFIG6H WRTD WRTB WRTC — — — — — 111- ----
30000Ch CONFIG7L — — — — EBTR3 EBTR2 EBTR1 EBTR0 ---- 1111
30000Dh CONFIG7H —EBTRB — — — — — — -1-- ----
3FFFFEh DEVID1
(2)
DEV2 DEV1 DEV0 REV4 REV3 REV2 REV1 REV0 xxxx xxxx
3FFFFFh DEVID2
(2)
DEV10 DEV9 DEV8 DEV7 DEV6 DEV5 DEV4 DEV3 xxxx xxxx
Legend: x = unknown, u = unchanged, - = unimplemented, q = value depends on condition. Shaded cells are unimplemented, read as ‘ 0 ’.
Note 1: Implemented only on the 64-pin devices (PIC18F6XK80).
2: See Register 28-13 for DEVID1 values. DEVID registers are read-only and cannot be programmed by the user.
3: Maintain as ‘0’ on 28-pin, 40-pin and 44-pin devices.