Datasheet

 2010-2012 Microchip Technology Inc. DS39977F-page 183
PIC18F66K80 FAMILY
TABLE 11-6: SUMMARY OF REGISTERS ASSOCIATED WITH PORTC
RC7/CANRX/
RX1/DT1/
CCP4
RC7 0 O DIG LATC<7> data output.
1 I ST PORTC<7> data input.
CANRX
(2)
1 I ST CAN bus RX.
RX1
(1)
1 I ST Asynchronous serial receive data input (EUSARTx module).
DT1
(1)
1 O DIG Synchronous serial data output (EUSARTx module); takes priority over port data.
1 I ST Synchronous serial data input (EUSARTx module); user must configure as an
input.
CCP4 0 O DIG CCP4 compare/PWM output; takes priority over port data.
1 I ST CCP4 capture input.
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
PORTC RC7 RC6 RC5 RC4 RC3 RC2 RC1 RC0
LATC LATC7 LATBC6 LATC5 LATCB4 LATC3 LATC2 LATC1 LATC0
TRISC TRISC7 TRISC6 TRISC5 TRISC4TRISC3TRISC2TRISC1TRISC0
ODCON SSPOD
CCP5OD CCP4OD CCP3OD CCP2OD CCP1OD U2OD U1OD
Legend: Shaded cells are not used by PORTC.
TABLE 11-5: PORTC FUNCTIONS (CONTINUED)
Pin Name Function
TRIS
Setting
I/O
I/O
Type
Description
Legend: O = Output; I = Input; I
2
C = I
2
C/SMBus; ANA = Analog Signal; DIG = CMOS Output; ST = Schmitt Trigger Buffer Input; x
= Don’t care (TRIS bit does not affect port direction or is overridden for this option)
Note 1: The pin assignment for 28, 40 and 44-pin devices (PIC18F2XK80 and PIC18F4XK80).
2: The alternate pin assignment for CANRX and CANTX on 28, 40 and 44-pin devices (PIC18F4XK80) when the CANMX
Configuration bit is set.