Datasheet

 2010-2012 Microchip Technology Inc. DS41412F-page 435
PIC18(L)F2X/4XK22
27.4 DC Characteristics: RC Idle Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
D045 Supply Current (I
DD)
(1),(2)
0.5 18 A -40°C VDD = 1.8V FOSC = 31 kHz
(RC_IDLE mode,
LFINTOSC source)
0.6 18 A+25°C
0.7 — A+60°C
0.75 20 A+85°C
2.3 22 A +125°C
D046
1.1 20 A -40°C V
DD = 3.0V
1.2 20 A+25°C
1.3 — A+60°C
1.4 22 A+85°C
3.2 25 A +125°C
D047
17 30 A -40°C VDD = 2.3V FOSC = 31 kHz
(RC_IDLE mode,
LFINTOSC source)
13 30 A +25°C
14 30 A +85°C
15 45 A +125°C
D048
19 35 A -40°C VDD = 3.0V
15 35 A +25°C
16 35 A +85°C
17 50 A +125°C
D049
21 40 A -40°C VDD = 5.0V
15 40 A +25°C
16 40 A +85°C
18 60 A +125°C
D050
0.11 0.20 mA -40°C to +125°C V
DD = 1.8V FOSC = 500 kHz
(RC_IDLE mode,
MFINTOSC source)
D051
0.12 0.25 mA -40°C to +125°C V
DD = 3.0V
D052
0.14 0.21 mA -40°C to +125°C VDD = 2.3V FOSC = 500 kHz
(RC_IDLE mode,
MFINTOSC source)
D053
0.15 0.25 mA -40°C to +125°C VDD = 3.0V
D054
0.20 0.31 mA -40°C to +125°C VDD = 5.0V
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).