Datasheet

PIC18(L)F2X/4XK22
DS41412F-page 436  2010-2012 Microchip Technology Inc.
D055
0.25 0.40 mA -40°C to +125°C V
DD = 1.8V FOSC = 1 MHz
(RC_IDLE mode,
HFINTOSC source)
D056
0.35 0.50 mA -40°C to +125°C V
DD = 3.0V
D057
0.30 0.45 mA -40°C to +125°C V
DD = 2.3V FOSC = 1 MHz
(RC_IDLE mode,
HFINTOSC source)
D058
0.40 0.50 mA -40°C to +125°C VDD = 3.0V
D059
0.45 0.60 mA -40°C to +125°C VDD = 5.0V
D060
0.50 0.7 mA -40°C to +125°C V
DD = 1.8V FOSC = 16 MHz
(RC_IDLE mode,
HFINTOSC source)
D061
0.80 1.1 mA -40°C to +125°C V
DD = 3.0V
D062
0.65 1.0 mA -40°C to +125°C VDD = 2.3V FOSC = 16 MHz
(RC_IDLE mode,
HFINTOSC source)
D063
0.80 1.1 mA -40°C to +125°C VDD = 3.0V
D064
0.95 1.2 mA -40°C to +125°C VDD = 5.0V
D066
2.5 3.5 mA -40°C to +125°C V
DD = 3.0V FOSC = 64 MHz
(RC_IDLE mode,
HFINTOSC + PLL
source)
D068
2.5 3.5 mA -40°C to +125°C VDD = 3.0V FOSC = 64 MHz
(RC_IDLE mode,
HFINTOSC + PLL
source)
D069
3.0 4.5 mA -40°C to +125°C VDD = 5.0V
27.4 DC Characteristics: RC Idle Supply Current, PIC18(L)F2X/4XK22 (Continued)
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).