Information

PIC18F47J53 FAMILY
DS80506C-page 8  2010 Microchip Technology Inc.
4. Module: Electrical Characteristics
The D060, D061 and D063 rows in Section 31.3 DC
Characteristics: PIC18F47J53 Family (Industrial),
on page 527, have been pulled out of the table and
placed into Table 31-1. The new table, with updated
content, is shown below:
TABLE 31-1 DC CHARACTERISTICS:PIC18F47J53 FAMILY (INDUSTRIAL)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A  +85°C for industrial
Param
No.
Symbol Characteristic Typ Max Units Temp. Conditions
D060
I
IL Input Leakage Current)
(1,2)
I/O Ports without 5.5V Tolerance ±5 ±200 nA ±25ºC VSS  VPIN  VDD,
Pin at high-impedance
±15 ±500 nA +85ºC
I/O Ports with 5.5V Tolerance ±5 ±200 nA ±25ºC V
SS  VPIN  5.5V,
Pin at high-impedance
±15 ±500 nA +85ºC
D061 MCLR
±5 ±200 nA ±25ºC VSS  VPIN  VDD
±15 ±500 nA +85ºC
D062 D+/D- ±75 ±500 nA ±25ºC VSS  VPIN  VUSB
±75 ±500 nA +85ºC
D063 OSC1 ±5 ±200 nA ±25ºC V
SS  VPIN  VDD
±15 ±500 nA +85ºC
Note 1: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
2: Negative current is defined as current sourced by the pin.