Datasheet

2011 Microchip Technology Inc. DS39932D-page 467
PIC18F46J11 FAMILY
29.0 ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on any digital only I/O pin or MCLR
with respect to VSS (when VDD 2.0V) .................................. -0.3V to 6.0V
Voltage on any digital only I/O pin or MCLR
with respect to VSS (when VDD < 2.0V)..................... -0.3V to (VDD + 4.0V)
Voltage on any combined digital and analog pin with respect to V
SS (except VDD)........................ -0.3V to (VDD + 0.3V)
Voltage on V
DDCORE with respect to VSS ................................................................................................... -0.3V to 2.75V
Voltage on V
DD with respect to VSS ........................................................................................................... -0.3V to 4.0V
Total power dissipation (Note 1) ...............................................................................................................................1.0W
Maximum current out of V
SS pin ...........................................................................................................................300 mA
Maximum current into V
DD pin ..............................................................................................................................250 mA
Maximum output current sunk by any PORTB, PORTC and RA6 I/O pin...............................................................25mA
Maximum output current sunk by any PORTA (except RA6), PORTD and PORTE I/O pin......................................4 mA
Maximum output current sourced by any PORTB, PORTC and RA6 I/O pin .........................................................25 mA
Maximum output current sourced by any PORTA (except RA6), PORTD and PORTE I/O pin ................................4 mA
Maximum current sunk byall ports .......................................................................................................................200 mA
Maximum current sourced by all ports ..................................................................................................................200 mA
Note 1: Power dissipation is calculated as follows:
P
DIS = VDD x {IDD IOH} + {(VDD – VOH) x IOH} + (VOL x IOL)
FIGURE 29-1: PIC18F46J11 FAMILY VDD FREQUENCY GRAPH (INDUSTRIAL)
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
0
Voltage (VDD)
4.0V
2.15V
48 MHz
3.5V
3.0V
2.5V
3.6V
8 MHz
2.35V
PIC18F46J11 Family Valid Operating Range