Datasheet
PIC18F46J11 FAMILY
DS39932D-page 402 2011 Microchip Technology Inc.
REGISTER 26-6: CONFIG3H: CONFIGURATION REGISTER 3 HIGH (BYTE ADDRESS 300005h)
U-1 U-1 U-1 U-1 R/WO-1 U-0 U-0 R/WO-1
— — — — MSSPMSK — —IOL1WAY
bit 7 bit 0
Legend:
R = Readable bit WO = Write-Once bit U = Unimplemented bit, read as ‘0’
-n = Value at Reset ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 7-4 Unimplemented: Program the corresponding Flash Configuration bit to ‘1’
bit 3 MSSPMSK: MSSP 7-Bit Address Masking Mode Enable bit
1 = 7-Bit Address Masking mode enabled
0 = 5-Bit Address Masking mode enabled
bit 2-1 Unimplemented: Read as ‘0’
bit 0 IOL1WAY: IOLOCK One-Way Set Enable bit
1 = IOLOCK bit (PPSCON<0>) can be set once, provided the unlock sequence has been completed.
Once set, the Peripheral Pin Select registers cannot be written to a second time.
0 = IOLOCK bit (PPSCON<0>) can be set and cleared as needed, provided the unlock sequence has
been completed
REGISTER 26-7: CONFIG4L: CONFIGURATION REGISTER 4 LOW (BYTE ADDRESS 300006h)
R/WO-1 R/WO-1 R/WO-1 R/WO-1 R/WO-1 R/WO-1 R/WO-1 R/WO-1
WPCFG WPEND WPFP5
(2)
WPFP4
(3)
WPFP3 WPFP2 WPFP1 WPFP0
bit 7 bit 0
Legend:
R = Readable bit WO = Write-Once bit U = Unimplemented bit, read as ‘0’
-n = Value at Reset ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 7 WPCFG: Write/Erase Protect Configuration Region Select bit
1 = Configuration Words page is not erase/write-protected, unless WPEND and WPFP<5:0> settings
protect the Configuration Words page
(1)
0 = Configuration Words page is erase/write-protected, regardless of WPEND and WPFP<5:0>
(1)
bit 6 WPEND: Write/Erase Protect Region Select bit
1 = Flash pages WPFP<5:0> through Configuration Words page are erase/write-protected
0 = Flash pages 0 through WPFP<5:0> are erase/write-protected
bit 5-0 WPFP<5:0>: Write/Erase Protect Page Start/End Location bits
Used with WPEND bit to define which pages in Flash will be erase/write-protected.
Note 1: The “Configuration Words page” contains the FCWs and is the last page of implemented Flash memory on
a given device. Each page consists of 1,024 bytes. For example, on a device with 64 Kbytes of Flash, the
first page is 0 and the last page (Configuration Words page) is 63 (3Fh).
2: Not available on 32K and 16K devices.
3: Not available on 16K devices.