Datasheet

PIC18F2525/2620/4525/4620

27.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES

“Typical” represents the mean of the distribution at 25°C. “Maximum” or “minimum” represents (mean + 3σ) or (mean – 3σ)

respectively, where σ is a standard deviation, over the whole temperature range.

FIGURE 27-1: SLEEP MODE

Note: The graphs and tables provided following this note are a statistical summary based on a limited number of

samples and are provided for informational purposes only. The performance characteristics listed herein

are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified

operating range (e.g., outside specified power supply range) and therefore, outside the warranted range.

0.01

0.1

100

-50 -25 0 25 50 75 100 125

Temp (C)

Ipd (uA)

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

Test instrument results are compressed to about 0.05 μA for actual values below 0.05 μA.

Measurements below 0.01 μA are suspect, and are considered unmeasurable.

This is supported by the instrument specifications.